Arlon PCB ( Any Arlon PCB Enquiry Please send mail to Sales@jtpcb.com.cn )
Arlon PCB Materials for Electronics (MED) is a Division of Arlon LLC a major manufacturer of specialty high performance laminate and prepreg materials for use in a wide variety of PCB (printed circuit board) applications. These applications typically require laminates with specialized electrical, thermal, mechanical, or other performance characteristic that exceed those of traditional standard FR-4 materials.
Arlon Electronic Substrates specializes in thermoset resin technology including polyimide, high Tg multifunctional epoxy, and low loss thermoset laminate and prepreg systems. These resin systems are available on a variety of substrates including woven glass and non-woven aramid. Typical applications for these materials include advanced commercial and military electronics such as avionics, semiconductor testing, heat sink bonding, High Density Interconnect (HDI) and microvia PCB’s (i.e. in mobile communication products).
Arlon Microwave Materials specializes in fluoropolymers ( i.e. PTFE), ceramic-filled fluoropolymers, and low loss ceramic hydrocarbon thermoset laminates that deliver the electrical performance needed in frequency-dependent circuit applications such as base station antennas, phased array radars, power amplifier boards, communications systems, and various other antenna applications. An exciting product is a lower loss version of CLTE, called CLTE-XT. CLTE-XT has the lowest loss, lowest thermal expansion, highest phase stability, and lowest moisture absorption of any product in its class.
1. Arlon PCB Material Part Number :
Arlon Polyimide Products
Arlon 33N Kerimid 701 (VO) Polyimide
Arlon 35N Kerimid 701 (V1) Polyimide
Arlon 85N Polyimide - Unmodified
Arlon 84N Multifilm Hole-Fill Prepreg
Arlon 38N Low Flow Polyimide Prepreg
Arlon 37N Low-Flow vs. No-Flow Polyimide
Arlon HF-50 Polymide Hole Fill Compound
2. Arlon Epoxy Products :
Arlon 44N "Multifilm" Hole-Fill Prepreg
Arlon 45N Multifunctional Epoxy
Arlon 47N Low-Flow Tetrafunctional Epoxy
Arlon 49N Low-Flow Multifunctional Prepreg
3. Arlon Legacy Thermount® Products :
Arlon 51N Low-Flow Lead-Free
Arlon 55NT Multifunctional Epoxy/Thermount®
Arlon 85NT Polyimide/Thermount®
Arlon 55LM Low Moisture Regain Thermount®
Arlon 55ST Multifunctional Epoxy/Thermount®
Arlon Microwave Products
4. Arlon CLTE Product Family :
Arlon CLTE-XT
Arlon CLTE-AT
Arlon CLTE
5. Arlon TC Product Family :
Arlon TC350
Arlon TC600
6. Arlon Next Generation of Lower Loss Materials, Available with PIM+ Technology :
Arlon AD255A
Arlon AD260A
Arlon AD300A
Arlon AD320A
7. PTFE and Microdispersed Ceramic reinforced with Commercial Grade Glass :
|
Arlon AD350A
Arlon AD410
Arlon AD430
Arlon AD450
Arlon AD1000
|
Arlon AD350A
|
8. Arlon Traditional Products - High PTFE to Glass Ratio, Lowest Loss Woven Fiberglass Reinforced PTFE - Unidirectional Plies :
Arlon CuClad 250GT
Arlon CuClad 250GX
Arlon CuClad 233LX
Arlon CuClad 217LX
9. Arlon Traditional Products - High PTFE to Glass Ratio, Lowest Loss Non-Woven Reinforced PTFE :
Arlon IsoClad 917
Arlon IsoClad 933
10. Arlon Ultra Thin Laminates with Higher Dielectric Constant :
Arlon AD5
Arlon AD10
11. Arlon Ceramic Hydrocarbon Thermoset Laminates & Pre-Pregs :
Arlon 25N
Arlon 25FR
12. Arlon Legacy, Low Cost Commercial Based Laminates :
Arlon CLTE-LC
Arlon AD250
Arlon AD255
Arlon AD270
Arlon AD320
Arlon AD350
Arlon AD600
Arlon AR1000
13. Thermoplastic Bonding Films for Stripline and Multilayer Packages :
CuClad 6250
CuClad 6700
CLTE-P
Will all the different features of every RF PCB application, we have developed partnerships with the key material suppliers such as Rogers, Arlon, Nelco, and Taconic just to name a few. While many of the materials are very specialized, we do hold significant stock of product in our warehouse
|
Shenzhen JieTeng Precision Electronics Co., Ltd.
Contact Person： Sophia Wen
Mobile：13510797526
Q Q： 3342625352
Phone：0755-23500787
Fax： 0755-27099486
|
 |
文章关键词：雅龙微波射频板 Arlon Microwave RF PCB